Posted  by 

Sccm Deployment Waiting For Another Program

Sccm Deployment Waiting For Another Program Rating: 7,2/10 5031 votes

I am setting up many new machines in the last month. But sometimes, when installing applications after rolling out an image. The applications wont install and display the waiting to install message. This mostly last for 1-2 hours but sometimes ever longer.
None of the logs that I have checked seem to give any indication why it will not move forward. Any
thoughts on how to troubleshoot?
For what it's worth, we are setup with a standalone primary site with one distribution point installed. SCCM 2012 SP1.
Thanks in advance.

However, I do have other computers that are displaying similar issues with installing patches and updates. It would be great to know if there is a way to 'start over' as if there is nothing in software center and the client needs to go back to the SCCM server to pull all current advertisements and instructions. Open up GlobalProtect application, click properties, go to Deployment Types, click edit, on the tabs click Detection Method, click edit, on setting type select 'Windows Installer' then on the Product Code click browse look for globalprotect64.msi it will get product code. To deploy a task sequence, use the Deploy Task Sequence activity. To deploy software updates in an update group, use the Deploy Software Update activity. To deploy a legacy application, use the Deploy Program activity. Get Deployment Status properties. Deployment Type: The type of deployment for which you want to retrieve information.

I see many error messages concerning BITS. This is a part of the DataTransferService.logDTSJob {183F4DC8-B329-4648-B351-D72BE3759642} in state 'DownloadingData'. DataTransferService 22/08/2014 15:26:24 7428 (0x1D04)
CDTSJob::HandleErrors: DTS Job '{183F4DC8-B329-4648-B351-D72BE3759642}' BITS Job '{FC9A9789-B3B1-4804-A59F-22E08B6D6F3A}' under user 'S-1-5-18' OldErrorCount 0 NewErrorCount 1 ErrorCode 0x80190194 DataTransferService 22/08/2014 15:26:24 5828 (0x16C4)
CDTSJob::HandleErrors: DTS Job URL='http://SITE SERVER:80/SMS_MP' ProtType=1 DataTransferService 22/08/2014 15:26:24 5828 (0x16C4)
CDTSJob::JobError: DTS Job BITS Job ErrorCode=0x80190194 DataTransferService 22/08/2014 15:26:24 5828 (0x16C4)
CDTSJob::JobError: DTS Job URL='http://SITE SERVER:80/SMS_MP' ProtType=1 DataTransferService 22/08/2014 15:26:24 5828 (0x16C4)
DTS job {183F4DC8-B329-4648-B351-D72BE3759642} BITS job {FC9A9789-B3B1-4804-A59F-22E08B6D6F3A} failed to download source file http://SITE SERVER:80/SMS_MP/.sms_pol?%7BC2FB5733-0FDF-4907-8617-29B1DC078E83%7D/15.1_00 to destination C:WindowsCCMTemp{F001BFC6-8830-46F3-96B8-9CC08B1A4539}.tmp with error 0x80190194 DataTransferService 22/08/2014 15:26:24 5828 (0x16C4)
DTS job {183F4DC8-B329-4648-B351-D72BE3759642} BITS job {FC9A9789-B3B1-4804-A59F-22E08B6D6F3A} partially completed 0/1 with error 0x80190194 context 5 DataTransferService 22/08/2014 15:26:24 5828 (0x16C4)
DTSJob {183F4DC8-B329-4648-B351-D72BE3759642} in state 'Error'. DataTransferService 22/08/2014 15:26:24 5828 (0x16C4)
DTSJob {183F4DC8-B329-4648-B351-D72BE3759642} in state 'NotifiedComplete'. DataTransferService 22/08/2014 15:26:24 7428 (0x1D04)
DTS job {183F4DC8-B329-4648-B351-D72BE3759642} has completed:
Status : ERROR (0x80070002),
Start time : 08/22/2014 15:26:24,
Completion time : 08/22/2014 15:26:24,
Elapsed time : 0 seconds DataTransferService 22/08/2014 15:26:24 7428 (0x1D04)

Similar Messages

  • Hi Gents
    I am attempting to deploy applications to a test machine. The software deployment reaches the test machine in the software center but it fails.
    One Application had the status 'Past due - will be installed'
    The rest just state 'Fail' with more information saying:
    'The software change returned error code 0x80070005 (-2147024891)
    I've been googling away here and iwll continue to do so until i find a resolution but hopefully you guys can help point me in the right direction.
    Thanks for the help guys
    Lee

    Ok i got it to a point where the status of the applications is 'waiting to install' so they download fine but not actually installing. I followed this link:
    http://777notes.wordpress.com/2012/08/17/sccm-2012-local-content-cach-failed-for-workgroup-machine/ anbd enabled the anonymous checkbox. But still the apps arent installing.

  • Hi,
    As the application is being deployed, the 'Devices with Application' under Application Statistics is showing 723, when in fact only 10 systems have been added through Direct Rule. Under Deployment Status it reflects the right amount (Already Compliant
    - 3 Assets; Success - 7 Assets).
    Does anybody have any idea why it is slowly (over the period of 5 days now) it keeps installing the application on all systems (there are total of 1,500 systems)? Also the same application was used through task sequence, but I don't believe it is possible
    to clone 723 computers over period of five days). Also, under the Supersedence tab has been set to upgrade old versions.
    Checking with query shows that all 723 have been deployed.
    Thanks,
    Waldis

    Hi,
    Have you resolved this problem? As Jörgen said, you need to remove the old version application deployments.
    Best Regards,
    Joyce Li
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Hi,
    We have setup SCCM 2012 application portal correctly and it's working fine.
    However some config questions:
    -can we change the name of the configuration portal? Now its servername/CMApplicationCatalog .. what's not userfriendly.
    We'd like it to be applicationportal.ourcompany.com. Howto achieve that?
    -can we customize layout in a supported way (we could change html pages but after an upgrade of SCCM they would/could be erased)?
    -how does flexera (adminstudio?) plugs in into this. I've read this entry
    http://helpnet.installshield.com/appportal2014/Content/helplibrary/AP_CreatingCatItemSCCM.htm but what's the big picture here? Anybody using this? What are the advantages?
    J.
    Jan Hoedt

    We want to offer software center for overview of mandatory installs, application catalog for optional software.
    On our companies portal, we can then set a link which directs to the application portal. User can then install optional software from there.
    My current config works http://applicationportal.ourcompany.com/ goes to the sccm-server but not to the url below.
    That would be http://applicationportal.ourcompany.com/CMApplicationCatalog/#/SoftwareLibrary/AppListPageView.xaml
    how can I make sure the application portal shows up when this link is opened?
    It sounds like you want to perform a URL rewrite?
    http://www.iis.net/learn/extensions/url-rewrite-module/creating-rewrite-rules-for-the-url-rewrite-module
    You should test this to see if it's what you want - I may have misunderstood your question.
    Also, I wouldn't host this module on your AppCatalog server, I'd host the rewrite module elsewhere.
    Don
    (Please take a moment to 'Vote as Helpful' and/or 'Mark as Answer', where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • I'm searching for any utilities / APIs available for SCCM 2012 Application catalog, to initiate a Application installation from a Script(From client machine). Got to know there Client programming is possible, but not able to get good examples. Please help
    Regards, Eswar

    Hi,
    Hope the following sample could help you.
    Sample SCCM Application
    Best Regards,
    Joyce Li
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • ipad with retina display is stuck on 'waiting' in installing app and will not finish?

    Apps stuck on waiting
    http://www.labnol.org/internet/download-apps-stuck-on-waiting/25793/

  • Hi
    I have been getting a lot of problems with Os/Application Task Sequences and have been asked a few questions.
    I cannot find anything on the Web about Limitations for a simulated deployment in SCCM 2012.
    I know SCCM allows you to create them but does it work/Are the results accurate?
    I need to know the following:
    Can you simulate an OS Deployment Task Sequence?
    Can you simulate an Application Deployment Task Sequence?
    Are there limitations to Simulated Deployments?
    Thanks guys Hope this makes sense and you can help.
    Regards
    Anthony

    If you have the MDT integration with SCCM 2012 you can simulate the settings used by the task sequence, but not the actual task sequence deployment. However, seeing the settings is often enough.
    Check this post:
    Save time (and avoid pain) - Create a MDT simulation environment
    http://www.deploymentresearch.com/Research/tabid/62/EntryId/155/Save-time-and-avoid-pain-Create-a-MDT-simulation-environment.aspx
    / Johan
    Regards / Johan Arwidmark Twitter: @jarwidmark Blog: http://www.deploymentresearch.com FB: www.facebook.com/deploymentresearch

  • Hi there
    I am replacing an app with a newer version via SCCM 2012.
    So lets call the existing app App1 and the new app App2.
    I have an application created which has App1 configured to be superseded (uninstall) and App2 to be installed as a msi deployment type.
    The issue I have ran into is that the install/upgrade fails if App1 is currently opened and running. The uninstall only works if App1 is not opened.
    Anyone had to deal with something like this before without reverting to a script deployment type which runs taskkill commands and then a msiexec /x command? Is there a more sophisticated way to do this using the new application model?
    The sequence would need to be:
    1) App1 if running on the target machine is killed
    2) App1 is uninstalled
    3) App2 is installed
    Anyone put anything like that together?
    Regards
    John

    Thank you for replying.
    Yes the key is indeed the uninstallation command and behaviour on App1; as my question makes clear I am aware of that.
    I am hoping someone has come up with a clever way of achieving such a requirement, or I will simply have to use a script, which seems a bit unsophisticated given the range of options available in the application model.
    Regards
    John

  • Just getting to grips with SCCM 2012, have a deployed Adobe Flash 13 to a bunch of users. How does SCCM handle this?
    i.e.
    Does it deploy straight away once a user logs on or is there other criterea taken into account?

    The user has to become member of the collection (if he/she is not yet in it), the client has to retrieve policies (which happens on a scheduled basis, after login or when unlocking the PC). Then it depends on the way you created the deployment: available:
    user has to start the installation using the application catalog. required: the application will be installed at the deadline.
    Torsten Meringer http://www.mssccmfaq.de

  • I have an SCCM 2012 package which is being deployed to a device collection
    The users are not seeing this package appear in the application catalog, nor is it appearing in the software centre
    Can we no longer deploy (advertise) to device collections for the users to install when needed?

    If it is not appearing in Software Center, then either the deployment policy has not been retrieved by the client, it is not in the target collection, or has been filtered out due to platform restrictions (or some other restriction like that). Or the client
    Cygwin free download. is not able to communicate with the MP, which would be a cause of the first option (the policy has not been retrieved by the client). You'd need to check to ensure that all is working on that end.
    Wally Mead

  • Hi Giants,
    Its Great to work with SCCM 2012 with plenty of New Features.
    Let me explain my requirement.
    1. Office 2010 Professional Plus SP1 with 15 Language Packs included
    -----MSP 1. Without Access
    -----MSP 2. With Access
    -----MSP 3. With Access and Retain Old Version Access
    Now My Requirement.
    1. We want to deploy Office with Access to 'Collection 1' and Office without Access to 'Collection 2'
    2. If i create Office 2010 as a Application, i can create two deployment type with different command line, but i can select the deployment type while creating Deployment. [ There should of been a drop down option like Packages. :-( ]
    3. If i create Office 2010 as a Package, i cannot use the detection method or requirement rules and even i cannot publish it to Application Catalog.
    Now the Scenario.
    1. I can create 2 application with same source with different command line and deploy to different collection, but if i update the content in the source package, i need to give a update content to both the applications.
    2. Its not a big problem to give update content to both packages, but the problem is for 1st application if i give update content, sccm will find the difference and sent the changes to DP, and when i give update content to 2nd application the same process
    happens and changes are transferred to DP.
    Now the Problem
    1. the effort involved in transferring the changes to DP becomes twice, which means 1 GB of changes will make 2 GB transfer to DP and when adding to Content Library, SCCM is smart enough to save 1 GB.
    2. Is there any where we can avoid multiple transfer to DP which will eat the bandwidth.
    3. Or is there a way to define which deployment type to used in Deployment.
    4. Or is there a way to publish Packages to Application Catalog.
    Thanks in Advance.

    Hi Torsten,
    Thanks for the reply.
    1. if i create a single application with two different Deployment type, that is two different command line, which requirement rules i can use to differentiate them, because there is no logical separation for these command lines.
    i.e. DT1. Office with Access and DT2. Office without Access.
    this separation is done only for the license and is it possible to create a requirement in a way that only if this specific device in a specific collection user 'With Access' or 'Without Access'
    2. Yes, CM12 is smart enough to save disk space with content library, but that smartness is missing while transferring the content to DP, which mean increase in Bandwidth utilization.
    3. Great, i was not aware that Classic Packages can be published to Software Catalog.
    Thanks Again,
    SithaYuvaraj.

  • Hi guys,
    Looking at deploying SCCM 2012 R2 and SCVMM 2012 R2. I've used SCCM 2012 quite a lot in a previous environment, but not SCVMM.
    I'm aware SCVMM is for bare-metal Hyper-V (as well as Xen and ESXi), and for managing the virtual environment, but do I create VM templates and create my VM Servers within SCVMM, or just the shell and PXE boot into a SCCM Task Sequence to deploy the OS?
    Will also be running Orchestrator too.. So to deploy a VM would a runbook be used to create a VM shell in SCVMM, and then kick off a TS in SCCM?
    Or should I be building the server templates and basically replicating some of SCCM's OSD capability for VM servers in SCVMM?
    Thanks - Steve

    Thx Stevehoot.
    Yes, you might see that there are some 'overlapping' technologies involved, but please remember that SCCM is the general approach, that has been supporting physical servers/computers since day one. This requires PXE boot for the VMs as well, in order to
    deploy the OS, install the agent and then the applications.
    Using VMM for VM deployment, the VMM agent will handle this all for you and you can manage your datacenter from this single console. Currently, Gen2 has lacking support in some areas, like service templates in VMM, VM roles in Azure Pack and replication
    to Azure using Microsoft Azure Site Recovery.
    Moving forward, it would be smart if you could invest in deployment using VMM if the majority of your workloads will be on virtual machines. What we basically sees in the field is that people are using SCCM to deploy their traditional applications onto these
    servers where service templates may not be the right solution. But again, then SCCM is something that kicks in post the VM deployment.
    -kn
    Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

  • Hello I'm currently working on a medium sized network and we have migrated about half our clients from 2007 to 2012 SCCM client. As we are doing security patches and deployments from both SCCM 2007 and 2012 there is a significant difference in speed of deployment
    as in clients picking up on a deployment and acting on it. SCCM 2007 has mostly completed in 2hrs where as 2012 has barely started. We have changed the application deployment cycle in the client setting down to 15min but this doesn't seem to of made much difference.
    I have noticed that I have to jump on a machine and do a ipconfig /release then renew to get the advertisements started. But DNS is looking ok?
    Any suggestions?
    SCCM Deployment Technician

    Hi,
    As this thread has been quiet for a while, we assume that the issue has been resolved. At this time, we will mark it as 'Answered' as the previous steps should be helpful for many similar scenarios.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Hi All,
    We have purchased the system center suit and planed to deploy the below products in our environment.
    SCOM - Plan already made and architecture is ready with no issues
    SCCM - In planning state.
    We are planning to use the same SQL server for both SCOM and SCCM, Which is a SQL Server 2008 R2 SP1 CU6. So the database engine service is available to host our database.
    But the Business has said we need to deploy reporting on another machine which may be a SQL 2012 SP1.
    What i want to know is does SCCM 2012 R2 support using different versions of SQL server for its features? As i see there is no documentation for this.
    How ever MS has given the document for SCOM that it is not supported and we need to use the same version of SQL for all the features.
    Also is SQL Express edition supported for other Primary sites if i use a licensed SQL in my CAS ?
    Does any one have an idea on SCCM 2012 R2 for the above ?
    Gautam.75801

    Thank you very Grath.
    Also my last and the remaining question is about the SQL Server version inter operability.
    Does using different versions of SQL work in SCCM ? i.E I use DB Engine SQL 2008 R2 SP1 CU6 and if i use SQL 2012 R2 for reporting.
    Will this work in SCCM ? As for SCOM MS has said this in there document that using different versions of SQL's for features is not supported.
    So what is the case with SCCM is it the same or is it supported ?
    As the Microsoft documents do not talk about this question.
    The reason i asked is as the business does not have cost for Hardware for a SQL server and they are asking to use a SQL server in another domain for DB engine.
    And another SQL server for reporting as the DB engine server does not have reporting.
    Gautam.75801

  • Hi team,
    In a client's SCCM 2012 R2 environment there is a Critical Icon and Status against one of two Application Catalog Website point roles. Looking at the Component status, there are no errors and all the components show as green.
    Trying to find any warnings or errors in the messages for the Site System role doesnt show any errors, and I tried to reset counts but this has not changed the status.
    I am not sure where to go from here. The application catalog itself works and is up. All the services are running. I am unsure as to where this error status comes from or what it pertains to.
    Any advice would be appreciated.

    Hi,
    Please check portlctl.log and awebsctl.log to see if there is any error.
    You could also check the thread below.
    Symptom: Reporting Services Point Status (under Monitoring - System Status - Site Status) appears as Critical, No error messages in logs or status messages
    Cause: 'Status' can be set to '2' for 'SMS SRS Reporting Point' in dbo.summarizer_sitesystem table in sql
    Resolution: > Run below query:
    update dbo.summarizer_sitesystem set status = '0' where SiteSystem = '['Display=abc.local']MSWNET:['SMS_SITE=ABC']abc.local' and role = 'SMS SRS Reporting Point'
    > It should set the status back to 0.
    > Check in console and errors should go away.
    > In case if value reverts back then check below namespace in wmi of site server:
    rootsmssite_prisms_sitesystemsummarizer
    > check the value for reporting services point, ideally it should be 0, let's say it's set to 2 there as well then remove role of reporting services point.
    > if entry for reporting services point goes away from both the places then it's good, you can re-install the reporting services point and it should work fine.
    > Let's say if value/values doesn't get removed from sql/wmi , remove them manually via queries and then go with uninstall and re-install.
    > then it should work and errors in console and common.log should go away.
    https://social.technet.microsoft.com/Forums/en-US/5e0b7af6-f00c-4610-a709-f3e0e26505be/sccm-2012-monitoring-site-status-reporting-services-point-status-critical?forum=configmanagergeneral
    Best Regards,
    Joyce
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Maybe you are looking for

Another

  • Once the download is finished and it is in the C:Users/name/downloads section of my hardrive under a folder labeled 'Package' What should I do with this file? It contains mainly zip files that I am unable to extract and cannot open for various reason

  • Apparently I am the only person in the world having this problem but so far speedgrade is working if I bring a file in from Premiere Pro but If I try to bring one from the desktop I get a placeholder graphic 'error opening file' there are also no thu

  • I cannot change my password or share files, as it gives me an error about being allowed to. I am not using an LDAP account and this account was NOT managed before the upgrade. When I uncheck the 'Enable Parental Controls' box, it gives me a message s

  • Hi, I've installed LR4. At installation, it created a Lightroom folder in my Pictures folder (I have an iMac). Also inside the Pictures folder is a folder I created called Mike's LR Photos (I'm trying to follow Scott Kelby's book). Within my 'Mi

  • Can I load ios 6 to my iPad2, I think I want wait on 7, just from what I have heard from others as it relates to iPad 2

-->

Important

Sccm Deployment Waiting For Another Program For Business

This version of Orchestrator has reached the end of support, we recommend you to upgrade to Orchestrator 2019.

The Get Deployment Status activity is used to retrieve the status of anapplication, program, task sequence, or software update deploymentassigned to a computer or collection to determine if a softwaredeployment action has completed.

To change the century cutoff date, follow these steps: Click Start, point to Settings, and then click Control Panel.; Double-click the Regional Settings icon.; Click the Date tab.; In the When a two digit year is entered, interpret a year between box, type the cutoff year that you want, and then click OK.; The following table illustrates the effect that various cutoff years will have when you. The combinations of the year, the month, the day and the separators can be endless. The following are 100 common date text formats and the formulas to convert them into the real dates. After you convert the text into the date format, you can use the format cells method again to transfer to the format. Created on October 30, 2018 8 Digit Date Format Can anyone tell me if it is possible in Excel to format the date in cells as ' instead of '6/7/2018'? Excel format for two digit date and four digit year mac 2018 crack. To convert a text date in a cell to a serial number, use the DATEVALUE function. Then copy the formula, select the cells that contain the text dates, and use Paste Special to apply a date format to them. Follow these steps: Select a blank cell and verify that its number format is General. Change the date system, format, or two-digit year interpretation. For example, if you are working in Excel and you open a document that was created in Excel for Mac, the 1904 date system check box is selected automatically. You can change the date system by doing the following.

To deploy an application (using the new Configuration Managerapplication model), use the Deploy Application activity. To deploy atask sequence, use the Deploy Task Sequence activity. To deploysoftware updates in an update group, use the Deploy Software Updateactivity. To deploy a legacy application, use the Deploy Programactivity

Get Deployment Status properties

  • Deployment Type: The type of deployment for which you want to retrieve information. Options are:
    • Application
    • Program
    • Task Sequence
    • Software Update
  • Filters: Filters available are dependent on the type of deployment selected. Filters modify the query sent to Configuration Manager so that the data returned to Orchestrator is already limited to desired results. This improves performance over returning all data and filtering at the Orchestrator server.

To add new filter criteria:

  1. Click Add and select the property on which to filter.

  2. Select a Relation and then enter a value for the filter.

    The type of relation value available will depend on the data type of the property selected.

Get Deployment Status published data

The following values are published in addition to the input valuesabove:

ElementDescription
ConnectionSpecifies the name of the connection to the Configuration Manager server
Result CountThe number of values returned by the query

The following list describes the Published Data for the availableDeployment Types.

Program or task sequence

  • AdvertisementID ID of the advertisement (deployment)
  • LastAcceptanceMessageID Last acceptance status message ID
  • LastAcceptanceMessageIDName Short description of the last acceptance status message
  • LastAcceptanceMessageIDSeverity
    • Error: 3221225472
    • Warning: 2147483648
    • Informational: 1073741824
  • LastAcceptanceState Numeric category of the last acceptance status message
  • LastAcceptanceStateName Short description of the acceptance category
  • LastAcceptanceStatusTime Date and time, in Universal Coordinated Time (UTC), when the last acceptance message was generated
  • LastExecutionContext User context (account) under which the program ran
  • LastExecutionResult Last string returned by a status Management Information Format (MIF) file (messages 10007 and 10009) or an error return code (10006)
  • LastState Numeric category of the last delivery status message
  • LastStateName Short description of the delivery category, including:
    • Accepted – No Further Status
    • Succeeded
    • Failed
    • Waiting
    • No Status
  • LastStatusMessageID Last delivery status message ID
  • LastStatusMessageIDName Short description of the last delivery status message.
  • LastStatusMessageIDSeverity
    • Error: 3221225472
    • Warning: 2147483648
    • Informational: 1073741824
  • LastStatusTime Date and time, in Universal Coordinated Time (UTC), when the last delivery message was generated
  • ResourceID Resource ID of the device

Sccm Deployment Waiting For Another Program May

Application

Sccm Operating System Deployment Guide

  • AppCI Application CI
  • AppName The name of the application
  • AppStatusType App status type
  • AssignmentID ID of the advertisement (deployment)
  • AssignmentUniqueID GUID of the application
  • CollectionID ID of the collection this resource belongs to
  • CollectionName The name of the collection
  • ComplianceState The compliance state for the configuration item.
  • DTCI The ID of the Deployment Type used in this deployment
  • DTModelID The ID of the Deployment Type Model
  • DTName The name of the Deployment Type used for this deployment
  • DTResultID Deployment Type Result ID
  • DeploymentIntent 0 = Required, 1 = Available
  • EnforcementState The enforcement state. Possible values are:
    • Enforcement State Unknown
    • Enforcement Started
    • Enforcement waiting for content
    • Waiting for another installation to complete
    • Waiting for maintenance window before installing
    • Restart required before installing
    • General failure
    • Pending installation
    • Installing update
    • Pending system restart
    • Successfully installed update
    • Failed to install update
    • Downloading update
    • Downloaded update
    • Failed to download update
  • ExtendedInfoDescriptionID Extended information description ID
  • ExtendedInfoID Extended information ID
  • IsMachineAssignedToUser True or False. True if the machine is assigned to a user.
  • IsMachineChangesPersisted True or False. True if the virtual machine changes are persisted.
  • IsVM True or False. True if this is a virtual machine.
  • MachineID Resource ID of the device
  • MachineName Name of the device
  • PolicyModelID Policy model ID
  • Revision Revision number of the deployment
  • StartTime Deployment time
  • StatusType Status type:
    • Success
    • In Progress
    • Unknown
    • Error
  • Technology The deployment technology type, such as:
    • Windows Installer
    • App-V
    • Script
    • Nokia
  • UpdateState Update State
  • UserName User name
  • VMHostName If the device is a virtual machine, the name of the host for the VM

Sccm Deployment Waiting For Another Program For Pc

Software update

ElementDescription
AssignmentIDID of the advertisement (deployment)
AssignmentNameName of the advertisement (deployment)
AssignmentUniqueIDGUID of the application
CollectionIDID of the collection this resource belongs to
CollectionNameThe name of the collection
DeviceNameName of the device where the update is targeted
IsCompliantTrue or False
IsMachineAssignedToUserTrue or False. True if the machine is assigned to a user.
IsMachineChangesPersistedTrue or False. True if the virtual machine changes are persisted.
IsVMTrue or False. True if this is a virtual machine.
LastComplianceMessageDescLast Compliance Message Description
LastComplianceMessageIDLast Compliance Message ID
LastComplianceMessageTimeLast Compliance Message Time
LastEnforcementErrorCodeLast Enforcement Error Code
LastEnforcementErrorIDLast Enforcement Error ID
LastEnforcementErrorTimeLast Enforcement Error Time
LastEnforcementMessageDescLast Enforcement Message Description
LastEnforcementMessageIDLast Enforcement Message ID
LastEnforcementMessageTimeLast Enforcement Message Time
Resource IDResource ID of the device
StatusDescriptionStatus description
StatusEnforcementStateAdditional enforcement state for progress and error status (0 for others).
StatusErrorCodeAdditional error code for error status (0 for others)
StatusTimeStatus time
StatusTypeStatus type
UserIDUser ID
VMHostNameIf the device is a virtual machine, the name of the host for the VM

Configuring the Get Deployment Status activity

  1. From the Activities pane, drag a Get Deployment Statusactivity to the active runbook.
  2. Double-click the Get Deployment Status activity icon. TheProperties dialog box opens.
  3. Configuring the Details tab:

    1. In the Connection section, click the ellipsis button(..), and then select the Configuration Manager serverconnection that you want to use for this activity. Click OK.

    2. In the Fields section, enter a value for each of therequired properties. If the property is Lookup-enabled, you canclick the ellipsis (..) button next to the text box to browsefor a value.

      You can also use published data to automatically populate thevalue of the property from the data output by a previousactivity in the runbook.

  4. Click Finish.